An improved method for embryogenic suspension cultures of 'Richter 110' rootstock

Research Not

Metal-Matrix Composites and Thermal Spray Coatings for Earth Moving Machines

In the ninth quarter, investigations in steel matrix composites focused on characterization of abrasive wear and fracture test coupons in order to gain a better understanding of the material attributes contributing to the observed behavior in each test. Both the wear and fracture work found that the performance of the carbide cermet based composites was significantly affected by the dissolution of the hard particles and the elements added in hopes of discouraging dissolution. both thrusts focused on abrasive wear characterization. In abrasive wear this led to increase matrix hardness which increased wear resistance, however the fracture toughness of the composites were significantly reduced. In contrast, the oxide based composites demonstrated good fracture characteristics and the oxide particles provided superior protection to the high stress gouging wear imparted by pin-abrasion testing. For the thermal spray coating effort, modified coatings and fusing parameters were explored on simulated components. Significant improvements appear to have been achieved, and are demonstrated in the lack of observable cracking in the coatings. The abrasive wear characteristics of these components will be explored in the 10th quarter. An overview of the progress during the 9th quarter of this project is given below. Additional research details are provided in the limited rights appendix to this report

Stochastic virtual tests for fiber composites

We will describe a Virtual Test system for continuous fiber composites. The virtual test draws from a new wave of advanced experiments and theory that address physical, mathematical, and engineering aspects of material definition and failure prediction. The methods go far beyond currently standard tests and conventional FEM analysis to challenge our conception of what can constitute a practicable engineering approach. Emphasis will be given to high temperature ceramic matrix composites with textile reinforcement, which have been the subject material of the National Hypersonic Science Center, Materials and Structures, a joint AFOSR/NASA program. However, thematic topics also address generic fiber composites. Development has been organized as a “pipeline” that links the separate disciplinary efforts of groups housed in seven institutions spread across the United States. The main research steps are: high resolution three-dimensional (3D) imaging of the microstructure, statistical characterization of the microstructure, formulation of a probabilistic generator for creating virtual specimens that replicate the measured statistics, creation of a computational model for a virtual specimen that allows general representation of discrete damage events, calibration of the model using room and high temperature tests, simulation of failure, and model validation. Key new experiments include digital surface image correlation and µm-resolution 3D computed tomography imaging of the microstructure and evolving damage, both executed at temperatures exceeding 1500°C. Conceptual advances include using both geometry and topology to characterize stochastic microstructures. Computational methods include new probabilistic algorithms for generating stochastic virtual specimens and a new Augmented Finite Element Method that yields extreme efficiency in dealing with arbitrary cracking in heterogeneous materials. The challenge of relating variance in engineering properties to stochastic microstructure in a computationally tractable manner, while retaining necessary physical details in models, will be discussed

Mechanical metamaterials at the theoretical limit of isotropic elastic stiffness

Acknowledgements H.N.G.W. is grateful for support for this work by the ONR (grant number N00014-15-1-2933), managed by D. Shifler, and the DARPA MCMA programme (grant number W91CRB-10-1-005), managed by J. Goldwasser.Peer reviewedPostprintPostprintPostprintPostprin

Numerical study on load-bearing capabilities of beam-like lattice structures with three different unit cells

The design and analysis of lattice structures manufactured using Additive Manufacturing (AM) technique is a new approach to create lightweight high-strength components. However, it is difficult for engineers to choose the proper unit cell for a certain function structure and loading case. In this paper, three beam-like lattice structures with triangular prism, square prism and hexagonal prism were designed, manufactured by SLM process using AlSi10Mg and tested. The mechanical performances of lattice structures with equal relative density, equal base area and height, and equal length for all unit cells were conducted by Finite Element Analysis (FEA). It was found that effective Young’s modulus is proportional to relative density, but with different affecting levels. When the lattice structures are designed with the same relative density or the same side lengths, the effective Young’s modulus of lattice structure with triangular prism exhibits the maximum value for both cases. When the lattice structures are designed with the same base areas for all unit cells, the effective Young’s modulus of lattice structures with square prism presents the maximum. FEA results also show that the maximum stress of lattice structures with triangular prisms in each comparison is at the lowest level and the stiffness-to-mass ratio remains at the maximum value, showing the overwhelming advantages in terms of mechanical strength. The excellent agreements between numerical results and experimental tests reveal the validity of FEA methods applied. The results in this work provide an explicit guideline to fabricate beam-like lattice structures with the best tensile and bending capabilities

Experimental neck muscle pain impairs standing balance in humans

Impaired postural control has been reported in patients with chronic neck pain of both traumatic and non-traumatic etiologies, but whether painful stimulation of neck muscle per se can affect balance control during quiet standing in humans remains unclear. The purpose of the present experiment was thus to investigate the effect of experimental neck muscle pain on standing balance in young healthy adults. To achieve this goal, 16 male university students were asked to stand upright as still as possible on a force platform with their eyes closed in two conditions of No pain and Pain of the neck muscles elicited by experimental painful electrical stimulation. Postural control and postural performance were assessed by the displacements of the center of foot pressure (CoP) and of the center of mass (CoM), respectively. The results showed increased CoP and CoM displacements variance, range, mean velocity, and mean and median frequencies in the Pain relative to the No pain condition. The present findings emphasize the destabilizing effect of experimental neck muscle pain per se, and more largely stress the importance of intact neck neuromuscular function on standing balance

Large-Scale Assessment of the Zebrafish Embryo as a Possible Predictive Model in Toxicity Testing

Background: In the drug discovery pipeline, safety pharmacology is a major issue. The zebrafish has been proposed as a model that can bridge the gap in this field between cell assays (which are cost-effective, but low in data content) and rodent assays (which are high in data content, but less cost-efficient). However, zebrafish assays are only likely to be useful if they can be shown to have high predictive power. We examined this issue by assaying 60 water-soluble compounds representing a range of chemical classes and toxicological mechanisms. Methodology/Principal Findings: Over 20,000 wild-type zebrafish embryos (including controls) were cultured individually in defined buffer in 96-well plates. Embryos were exposed for a 96 hour period starting at 24 hours post fertilization. A logarithmic concentration series was used for range-finding, followed by a narrower geometric series for LC 50 determination. Zebrafish embryo LC50 (log mmol/L), and published data on rodent LD50 (log mmol/kg), were found to be strongly correlated (using Kendall’s rank correlation tau and Pearson’s product-moment correlation). The slope of the regression line for the full set of compounds was 0.73403. However, we found that the slope was strongly influenced by compound class. Thus, while most compounds had a similar toxicity level in both species, some compounds were markedly more toxic in zebrafish than in rodents, or vice versa. Conclusions: For the substances examined here, in aggregate, the zebrafish embryo model has good predictivity for toxicit